Menu

Resinous Floor Coatings

Overview of resinous floor coatings
  • Pours in place over existing concrete floors
  • Provides chemical resistance including grease and oils.
  • Creates impenetrable barrier
  • Can be cleaned with most high pressure systems including steam cleaning
  • Suitable for garages, commercial kitchens, and examination rooms
  • Suitable for high traffic areas that require repeated cleaning frequently
  • Maintains a compression strength of over 14,000 psi

CCI-600 Aria Pro

Epoxy Coating Base Coat
  • Special formulation for thicker coats
  • Can be tinted and/or flaked

CCI-610 Summit

Interior Epoxy Coating Top Coat
  • Special formulation for thin coats
  • Clear hardener
  • Can receive anti-skid additives

CCI-620 Aria White

Epoxy Coating Base Coat
  • Pre-colored for white coats
  • Special formulation for thicker coats
  • Suitable for airplane hangars

CCR-630 Quikote

Water Based Epoxy Coating
  • Economic coat for warehouse flooring
  • Can be tinted (except in light colors) and/or flaked
  • Provides a dust-free and easy clean surface

CCO-640 Aria Rapid UV

Urethane (Polyaspartic) Base Coat
  • Fast drying
  • Exceptional slip-resistance with sand broadcast
  • UV stable
  • Can be tinted and/or flaked

CCO-650 Summit Pro Rapid

Urethane (Polyaspartic) Top Coat
  • Fast drying
  • UV resistant
  • Hot tire resistant
  • Chemical resistant

CCO-651

Polyurethane Top Coat for FULL flake/quartz ONLY
  • UV resistant
  • Hot tire resistant
  • Chemical resistant

CCO-652

Polyurethane Top Coat
  • UV resistant
  • Hot tire resistant
  • Chemical resistant
  • Color enhancing
  • 100% solids

DWS-660 Seal UV

One Component Water-Based Sealer
  • Seals and protects indoor and outdoor concrete
  • UV and limited chemical resistance

UPS-670 Vari-Seal UV

Universal Protective Sealer
  • Two-part urethane clear coat
  • Seals and protects indoor concrete
  • UV and chemical resistant

XCF ColorFast Tint

Concentrated Tint for Coating Systems
  • Additive for epoxy and urethane coatings
  • Additive for urethane leveling compounds
  • Pre-measured quantities

XPF Polymer Flakes

Colored Flake Chips
  • Colored Flakes for epoxy and urethane coatings
  • Solid Colors and Blends available
  • See www.colorflakes.com for more choices

XTC-S Texturing Compound

Texturing Compound for Resinous Floor Coatings
  • Creates non-slip surface
  • Pre-measured quantities
  • Based on SIO2
  • Suitable for vehicular traffic
  • Thin coats only

XTC-P Texturing Compound

Texturing Compound for Resinous Floor Coatings
  • Creates non-slip surface
  • Pre-measured quantities
  • Based on Polypropylene
  • Suitable for indoor and outdoor
  • Stays suspended

ULC-500 LevelSeal

Two-Component Self-Leveling Compound
  • Will withstand any moisture
  • Moisture barrier up to 18# or 97% RH
  • Can be applied in any thickness over 1/32"
  • Cures in under 4 hours

EHS-265 Hydro-Seal

Water-Based Epoxy Primer (Two-Component Pail)
  • For use under ULC-500 and coatings
  • Superb penetration of subfloors
  • Increases bond of subsequent products

ECP-280 Isolator

Oil Barrier Over Concrete
  • Encapsulates oil residues in concrete
  • Can be used under any urethane levelers and adhesives
  • Can be used under epoxy and urethane coatings

EFP-290 Epoxy Floor Patch

Two component waterproof Floor Patch

Please enter the email address of the person to whom you would like to send this PDF.