PDF version
Technical Data Sheet (TDS)
WFR-Kit
Demo Kit for WFR-930
Special features
- Requires 1 gallon pail of WFR-930
|
|
| General Features |
- Contains no isocyanates
- Contains no water
- Contains no chlorinated solvents
- Flammable
- Ozone friendly
- Alcohol base for performance
- Freeze/thaw stable
|
| Installation Features |
- Wet lay - no flash time required
- Superior green grab
- Non-slump formula
- Bridges normal sub floor variations
- Eliminates hollow spots
- Pleasant odor
- Cleans with acetone
- No rolling required
- High spread rate
- Spreads easily
- Dries quickly
|
| Long Term Features |
- Resistant against aging
- Remains elastic
- Suitable for radiant heat systems with primer
|
| Approved Flooring |
- Engineered Wood Flooring
- Strip Flooring, 1/2 - 3/4 in
- Shorts, 1/2 - 3/4 in
- Planks, 1/2 - 3/4 in, up to 3 x 36 in
- Parquet
- Solid Wood Flooring must be straight and flat
- Bamboo or Eucalyptus NOT approved
|
| Approved Subfloors |
- Concrete Slabs
- OSB (underlayment grade)
- Plywood (underlayment grade)
- Cured Leveling Compounds
- Radiant Heated Subfloors
|
|
| Approved Primers |
- STAUF SOP-230 Solva-Prime
|
| Approved Sealers |
|
| Approved Leveling Compounds |
- STAUF SLC-540 Self Leveling Compound
- STAUF QFF-560 Quick Feather Float
|
| Approved Trowels and Spread Rate |
- Engineered Floors-#5 (3/16 x 1/4 x 3/8 in) up to 60 SF/gal.
- Solid Floors-#4 (1/4 x 7/32 x 9/32 in) up to 50 SF/gal.
- Parquet-#3 (5/32 x 1/8 x 3/16 in) up to 70 SF/gal.
|
| Clean-Up |
- Use acetone while wet or dried
- Will not etch floor finish
|
| Temperature Range during Installation |
|
| Relative Humidity Range during Installation |
|
| Packaging Size |
|
| Storage |
|
| Shelf Life |
- 24 Months in original, unopened container
|
| Open Time | 30% R/H | 50% R/H | 80% R/H | | 50�F/10�C | 25 min | 35 min. | 40 min. | | 70�F/21�C | 23 min. | 30 min. | 35 min. | | 90�F/32�C | 20 min. | 25 min. | 30 min. |
|
| Revision: 2022-04-22 11:47:14 |
|
