Technical Information
Select any of these Technical Information articles to find out more about specific products, techniques, or installation methods. Questions? Call the Stauf Technical Services Manager at 901.820.0007. He’ll be happy to help you!
#1 Primers & Sealers - The difference between them and when to use each one
#2 Bamboo Floors - Facts about bamboo flooring and what you might expect should you select it
#3 Approved UnderLayments - A list of tested and approved sound and moisture underlayments for use with STAUF Adhesives
#4 LVT, VCT, PVC, Vinyl over Wet Sub Floors - Products available and steps you can take to install vinyl products over wet subfloors.
#5 CBR-970 over Cutback Mastic - A new adhesive for use over cutback adhesives that greatly reduces the removal problems of cutback mastic.
#6 In Situ RH Test Standards - Find Stauf limits for moisture content using the newest method to test for moisture in lightweight concrete subfloors.
#7 Stained Concrete Installations - Here are the necessary steps for successfully gluing wood floors over stained concrete.
#24 Drying of Radiant Heated Slabs - Timetable for drying a heated concrete slab.
#25 Flakes and Texturing Compounds - Available standard flakes and texturing compounds for Resinous Floor Coatings.
#26 Outdoor Floor Coating - Step-by-step instructions for outdoor coatings.
#28 R741 and R701 Comparison Sheet - A side-by-side comparison of R741 Xtrem-Link Mono and R701 Xtrem-Link Duo.
#29 Chemical Resistance of Coatings - STAUF's coatings have been tested to be resistant to the chemicals indicated in this document.