Menu

PDF version

Technical Data Sheet (TDS)

ECP-280 Isolator

Oil Barrier Over Concrete

Special features

  • Encapsulates oil residues in concrete
  • Can be used under any urethane levelers and adhesives
  • Can be used under epoxy and urethane coatings

General Features
  • Contains no isocyanates
  • Dries in less than 2 hours
  • Contains no water
  • Contains no chlorinated solvents
  • High solids content
  • Ozone friendly
  • Freeze/thaw stable
Installation Features
  • Low odor
  • Spreads easily
  • Excellent penetration of subfloor
  • Higher temp will shorten drying time
  • Observe pot life during installation
Long Term Features
  • Resistant against aging
  • Suitable for radiant heat systems
VOC (Rule 1168 calc.) [g/L]
  • 84
Viscosity [cps]
  • A:1300-2000 B: <50 Mix:450
Bond Strength [psi]
  • > 1000
Shore D Hardness (ISO 7619)
  • >80
Approved Subfloors
  • Concrete Slabs
Approved Trowels and Spread Rate
  • 3/8 in. Nap Roller: up to 100 SF/gal. (16 mil)
Drying Time
  • Approx. 4 hours
Temperature Range during Installation
  • 50-90F (10-32C)
Relative Humidity Range during Installation
  • 20% - 90%
Packing Size
  • 1.2 gal Metal Pail Part A + 1.2 qrt Metal Can Part B
Density [lbs./gal.]
  • A:16.9 B: 7.5 Mix: 15.9
Color
  • Light Grey
Color Hardener
  • Clear
Mixing Ratio
  • 100 Parts A + 12 Parts B by weight
  • 3.7 Parts A + 1 Part B by volume
Pot Life
  • Approx. 45 min. @ 70F (21C)
pH value of concrete
  • Resistant up to 14
Storage
  • Above 14F
Shelf Life
  • 24 Months in original, unopened container
Transportation
  • UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxide resin), 9, III
  • UN 2733 POLYAMINES, FLAMMABLE, CORROSIVE, N.O.S. (Isophorone diamine), 3, II
Revision: 2022-10-10 10:28:28

Please enter the email address of the person to whom you would like to send this PDF.