STAUF USA Adhesive to glue down wood flooring and floor covering | Product Listing STAUF
Menu

PDF version

Technical Data Sheet (TDS)

D764ESD Roll-Tack

Releasable Static Dissipative Roll-on Flooring Adhesive

Special features

  • for Sheet Vinyl Flooring or VCT
  • for Carpet Tiles with Foam Backing
  • Coverage up to 500 SF/gal.
  • Wet or dry lay installation

Product Description
STAUF D764ESD is a highly specialized flooring adhesive that is designed specifically for the static dissipative installation of smooth backed surfaces requiring only fixation with possibility of removal and repair of flooring. Due to its spread yield it is very economical choice for larger commercial flooring installations. Types of flooring that can be installed include any flat backed static dissipative flooring. It has a superior green tack with very low shear strength so that damaged flooring can be removed and replaced.
STAUF D764ESD is non-hazardous. Due to the "green properties", STAUF D764ESD is eligible for LEED points.
Pre-Installation Checklist
A successful installation requires proper preparation of the sub floor. Read and understand all applicable guidelines and technical data sheets before installation. Follow industry standards and flooring manufacturer's recommendations for sub floor moisture content, design, layout and application of flooring materials. All slab constructions must meet the specific requirements of the floor covering to be installed.
Sub Floor Examination
Prior to installation, the sub floor must be checked according to applicable installation guidelines. It must be solid and sound, flat, permanently dry, clean, free of chaps, indentations and anti-adherents, as well as resistant to pressure and tension. Moisture content of all floors must be measured before installation.
Sub Floor Preparation
Depending on type and condition of sub floor, a mechanical treatment (e.g. mechanical brushing, grinding or sanding) may be required. Intensity of such work must be determined at the site by the installer. Dust, paint, residual adhesives or other surface contaminants must be removed by suitable means. Cleaning the surface with an industrial vacuum cleaner is recommended. Cracks and gaps must be filled with concrete crack filler unless they are expansion joints. Level when necessary to 3/16 inches within 10 feet. Heated sub floors must be primed.
Installation Procedure
Spread the adhesive with a foam or short nap roller. Avoid excessive adhesive thickness by passing the roller evenly through the adhesive. Observe the appropriate flash time (if applicable). Lay the flooring into the adhesive, correctly position it and press down firmly. Be sure to check the back of the flooring to make certain good adhesive transfer from sub floor to flooring is achieved. Roll flooring approx. 15-30 min after installation with a 75-100# roller. Push down raised edges approx. 30-60 min after installation.
Storage
Store and transport protected from freezing. Recommended minimum temperatures are 35 °F for transport and 40 °F for storage. Do not stir product if frozen, allow to thaw completely.
Limitations
When using other than STAUF products in conjunction with STAUF primers, sealers, leveling compounds, or adhesives, STAUF denies any and all responsibility for any ensuing problems and/or damages without prior written authorization from STAUF.
In case of accident, injury, spill or exposure, see SDS sheet for information. Consult technical data sheet at www.staufusa.com for updated information.
This adhesive will maintain its integrity and performance even when higher levels of moisture are present. While adhesive can withstand up to 8#/24 hrs/1,000 SF (Calcium Chloride Test) and 85% RH (in-situ probe) of moisture, it does not qualify as a moisture inhibitor. Please see below for recommended sealers if a moisture barrier is required. Not suitable for areas with excessive topical moisture (i.e. melting snow, repeated flooding, pressure washing) or extreme horizontal shear forces; use R-Series adhesives under these circumstances.
Not suitable for rolling loads. Not suitable for heavy commercial applications.
The foregoing representations are based on the results of our most current product and material testing within a controlled environment and are of a non-obligatory advisory nature only. As such, they do not constitute an express or implied warranty of any kind including the Warranty of Merchantability and/or Fitness for a Particular Purpose. Because we have no control over the actual quality of workmanship, materials used and worksite conditions, STAUF USA, LLC. will in no event be liable for any incidental and/or consequential damages. herefore, we strongly recommend that prior on-site testing be conducted to refer to and study the suitability of the product for the intended purpose. With the release of this technical information sheet all its prior versions become invalid. For warranty and warranty disclaimer information please see our Limited Lifetime Warranty @ www.staufusa.com
General Features
  • LEED qualified
  • contains no isocyanates
  • contains no chlorinated solvents
  • nonflammable
  • ozone friendly
  • dispersion base cleans with water
  • not freeze/thaw stable
  • contains no isocyanates
Installation Features
  • very low odor
  • cleans with warm water and soap
  • excellent spread rate
  • spreads easily
  • higher temp will shorten drying time
  • No risk of sensitization
Long Term Features
  • resistant against aging
  • suitable for radiant heat systems
  • No health hazards
Approved Flooring
  • Electrostatic Dissipative Flooring
Approved Sub Floors
  • Concrete Slabs
  • OSB (underlayment grade)
  • Plywood (underlayment grade)
  • Cured Leveling Compounds
  • Radiant Heated Sub Floors
  • Metal Floors
  • Asphalt
Approved Primers
  • Primer is normally not required
  • STAUF AQP-200 Eco-Prime
Approved Sealers
  • Sealer is normally not required
  • STAUF ACS-210 True-Seal
  • STAUF ERP-270 Perma-Seal
Approved Leveling Compounds
  • STAUF ULC-500 Universal Leveling Compound
  • STAUF SLC-540 Self Leveling Compound
  • STAUF QFF-560 Quick Feather Float
  • STAUF RLC-580 Fiber Level
Approved Trowels and Spread Rate
  • Thin Flooring over non-porous subfloor using PSA-#9 (1/32"x1/16"x1/32") up to 250 SF/gal.
  • Foam Roller: up to 500 SF/gal.
Cure Time until Normal Traffic
  • approx. 24 hours
Clean-Up
  • Use soap and water
Temperature Range during Installation
  • 50-90F
Relative Humidity Range during Installation
  • 30% - 80%
Packaging Size
  • 3 gal. Plastic Pail
Color
  • Grey
VOC (Rule 1168 calc.) [g/L]
  • 22
pH value of concrete
  • must be below 12.4
Electrostatic Resistance
  • less than 3 x 10^5 Ω
Transportation
  • above 32 F, not freeze/thaw stable
Storage
  • above 32 F, not freeze/thaw stable
Shelf Life
  • 12 Months in original, unopened container
Revision: 2018-07-17 15:57:23

Please enter the email address of the person to whom you would like to send this PDF.